What should be paid attention to in the design of steel structure workshop floor(steel structure house)?

What should be paid attention to in the design of steel structure workshop floor(steel structure house)?

01. Anti-seepage work

Because it is a roof design, the weather will have uncertainties, so relatively speaking, the anti-seepage work of the roof is a part of more concern. Therefore, in order to achieve the function of seepage prevention, it is necessary to use a concealed type after the sealing gasket is used at the screw opening.

Fixing, welding treatment at the lap joint of the board or using a sealant, preferably using a long-length plate to eliminate the lap joint, and finally doing bloating and strict waterproof treatment at various nodes.we are steel structure house manufacturer and provide steel structure house,we can guarantee quality.

Steel structure workshop

02. Ventilation facilities

Ventilation facilities are indispensable for buildings. Steel structure plants are crowded places, and should not be sloppy in the setting of ventilation facilities.

03. Selection of lighting

The steel structure workshop staff usually work inside, unlike the warehouse, so it is necessary to set a good position and direction in the lighting, so that it is convenient for the sun to shine in, and it is also convenient to prevent moisture.

What are the seismic construction measures for steel structure workshops?

First of all, the seismic measures of the roof are similar to those of reinforced concrete. Then, in order to ensure the stability of the column and the beam, the width of the frame column and the beam section plate are all in accordance with the requirements of the state, and the width of the component web can be reduced.we are steel structure house manufacturer and provide steel structure house,we can guarantee quality.

Finally, the structure of the cross-column support. If there is a crane, the upper and lower columns can be supported in the middle part of the workshop. Regardless of the size of the section, the support points are not necessarily in the middle.